Stainless steel has the characteristics of strong chips and high cutting temperature during processing. When the tough chips flow through the rake face, sticking phenomena such as bonding and fusion welding will occur, which will affect the surface roughness of the machined parts.

Before processing stainless steel parts, check whether the material specifications, grades, materials, and batch numbers meet the requirements of the drawings before processing the materials.

Before the material is processed, the quality of its inner and outer surfaces should be inspected, and there should be no defects such as cracks, folds, delaminations, scars, folds, hair lines, etc. on the surface.

When processing prefabricated stainless steel for stainless steel parts processing materials, avoid carbon steel in the surrounding workplace. Carbon steel parts can be wrapped with rubber to prevent iron from contaminating stainless steel. If a carbon steel platform is used, a template should be laid on the platform. The placement area of accessories should be covered with rubber pads on the surface of the formwork.

Professional stainless steel parts processing should not touch stainless steel workpieces with hands or dirty gloves at will, and clean labor protection supplies should be worn during processing.

All tools used in the machining of stainless steel shall meet the requirements and shall be marked with an easily identifiable mark to indicate that it is intended for machining of stainless steel only. Professional stainless steel machining is rarely flawed in craftsmanship.
