1. Stamping and drawing dies can produce and process parts with a wide range of specifications and complex appearances, such as timers as small as clocks, as large as vehicle side beams, covering parts, etc., plus the cold deformation of the material during stamping. The compressive strength and bending stiffness of stamping are high.
2. When stamping, because the die ensures the specification and appearance accuracy of the stamping parts, and generally does not damage the surface quality of the stamping parts, and the service life of the die is generally long, the quality of the stamping is stable, the tolerance is well matched, and it has "exactly the same". Features.
3. Stamping is generally not converted into chips and scraps, the material consumption is less, and other heating equipment is not required, so it is a material calculation, environmental protection and energy saving production and processing method, and the cost of stamping parts is low.
4. The production and processing of stamping and drawing dies are highly efficient, and the actual operation is convenient, which is convenient for the completion of mechanical automation and automation. This is because stamping is produced and processed by means of stamping dies and stamping machine tools. Generally, the frequency of the press schedule is It can reach dozens of times per minute, and the rapid working pressure can reach hundreds or even more than a thousand times per minute, and it is very possible to obtain a stamping part for each stamping stroke arrangement.