Operation principle of controller parts in CNC turning milling compound machining

Inspection of CNC turning milling compound processing:

Check the CNC milling machining center according to the daily inspection requirements of the efficiency control iron bed machining center. Check before power on

(1) Check the coolant tank, open the coolant tank (the coolant tank is usually at the base of the bed) and observe the liquid level in the tank Add in time as required.

(2) Observe the oil level of the lubricating oil tank (the lubricating oil tank is generally located at the back of the machine tool) and add it in time.

(3) The protective tooling shall remove the chips and dirt on the cutting wind protection device Wipe with a soft cloth.