Processing of stainless steel parts
The main thing here is that the folds of the parts are difficult to handle, and there are many factors. If you are a long-axis type, maybe the tailstock push force is not enough, or the tailstock is moving. If there is no problem with the tailstock, the tool wear, including machining parameters, Cutting fluid and many other issues.
There is also the material for processing stainless steel parts, and the corresponding selection of tools. Furthermore, it includes the problem of the machine tool itself, which can only be solved by exploring in practice. There is no solution to this alone, and other reasons need to be explored.
In fact, the main reason is because of the processing strength of stainless steel parts. It may be that the length of your processing parts is too long, or the length of your tool is too long. The center of the tool is high. Choose the right tool. Some are too high rotational speed to cause the resonance of the machine tool and the tool of the part, and patterns will also appear.
First of all, you have to make sure that the stability of the lathe is good or not, that is, the fixation of the lathe is good. Then there is whether there will be jitter when the spindle is running at a high speed, secondly, the coolant is very important, and then your tool should be ground well, and the chip flute should be opened well to prevent the workpiece from being scratched due to poor chip discharge, and turning the tool falling. When the angle is made into a circular arc angle, the other is not to resist the knife when installing the knife.
It is to match the speed of the spindle and the speed of the feed. If your lathe is not working very well, it is recommended to buy some sandpaper to get it. When the sandpaper is used, it is recommended to deal with the working direction of the turning tool, so that the texture of the stainless steel parts will be more processed. look better