1. The selection of cutting parameters should be reasonable
For the processing of metal cutting, there are three main elements, one is the processed material, one is the cutting tool, and the other is the cutting condition. These are directly related to the time, quality and tool life in processing.
The choice of cutting parameters has a direct relationship with economic benefits. Because in processing, the increase of cutting speed will lead to the temperature rise of the tool tip, and mechanical, chemical and thermal wear will occur at the same time. Data shows that cutting speed increases by 20% and tool life decreases by 12%.
The most suitable processing conditions are selected based on the processed material, hardness, cutting state, material type, feed rate, cutting depth, etc. Regular and stable wear is the ideal condition for reaching the service life.

2. The tool selection should be reasonable
(1) Rough turning: the selected cutting tool requires high strength and good durability, in order to meet the purpose of large cutting amount and large feed amount on the back of rough turning.
(2) Finish turning: the selected tool needs high precision and good durability, so as to ensure the accuracy requirements of processing.
At the same time, in order to reduce the time of changing knives and the convenience of setting knives, we should also try to use machine clamped knives and machine added knives.

3. Reasonable selection of fixtures
(1) General fixtures are easier to replace in production, saving replacement time and avoiding the use of special fixtures.
(2) The positioning datum of parts coincides to reduce and avoid positioning errors.
What should be paid attention to in CNC lathe machining - precautions for CNC lathe machining.jpg
4. Determination of processing route
(1) To determine the processing route, we should first meet the requirements of ensuring the processing accuracy and surface roughness.
(2) When determining the processing route, we should try our best to shorten the tool empty travel time and improve the tool efficiency.

5. Machining allowance
There is a direct relationship between machining allowance and machining route. Nowadays, CNC lathes have not been popularized in many places in lathe processing enterprises. Generally, the excess allowance on the rough slope should be arranged for machining, especially those with forging and casting hard skin on ordinary lathes.
6. Precautions for fixture installation
In today's lathe processing, the connection between the hydraulic chuck and the hydraulic clamping cylinder mainly depends on the pull rod. When clamping the hydraulic chuck, it is necessary to first remove the nut on the hydraulic cylinder with a wrench, remove the pull tube, and extract it from the rear end of the main shaft at the same time. After removing the chuck fixing screw with a wrench, the chuck can be removed.
