+86-15986734051

Specific Principles Of Machining

Aug 01, 2022

  (1) In order to ensure the machining accuracy, roughing and finishing are carried out separately. Because during rough machining, the cutting amount is large, the cutting force and clamping force on the workpiece are large, the heat generation is large, and the machined surface has a significant phenomenon of work hardening, and there is a large internal stress inside the workpiece. Continuously, the precision of the finished part will be quickly lost due to the redistribution of stress. For some parts that require high machining accuracy. After roughing and before finishing, a low-temperature annealing or aging treatment process should also be arranged to relieve internal stress.


  (2) Reasonable selection of equipment. Rough machining is mainly to cut off most of the machining allowance, and does not require high machining accuracy, so rough machining should be carried out on a machine tool with high power and low precision, and the finishing process requires higher precision machining. Machining. Roughing and finishing are processed on different machine tools, which can not only give full play to the capabilities of the equipment, but also prolong the service life of the precision machine tools.


  (3) In the machining process route, a heat treatment process is often arranged. The location of the heat treatment process is arranged as follows: in order to improve the machining performance of the metal, such as annealing, normalizing, quenching and tempering, etc., it is generally arranged before machining. In order to eliminate internal stress, such as aging treatment, quenching and tempering treatment, etc., it is generally arranged after rough machining and before finishing. In order to improve the mechanical properties of parts, such as carburizing, quenching, tempering, etc., it is generally arranged after machining. If there is large deformation after heat treatment, processing procedures must be arranged.


If you have any other questions, you can contact us directly

Send Inquiry