Machining Considerations
1. The operator should operate in accordance with the specified requirements. If they want to leave the machine tool, they should turn off the air source and power supply, and the machine tool should not be left in a
unmanned state;
2. The machine tool should not be overloaded or used with excess performance, and preventive maintenance and equipment maintenance should be carried out in time:
3. Tools, workpieces, etc. should be clamped correctly, and the clamping should be firm, and heavy hammering should not be performed: knives and abrasives should be kept sharp,
If it becomes dull or damaged, it should be replaced immediately:
4. The safety protection device cannot be disassembled at will. If there is no such device, the machine tool cannot be used:
5. Keep the site clean and tidy, and no tools, workpieces or other sundries can be placed on the machine tool:
6. Pay attention to the operation of the machine tool at any time. If there is any abnormality, you should stop and check immediately.