What problems should be paid attention to when programming machining:
1. Carefully analyze the drawings provided by customers and determine a reasonable processing route.
2. Select the appropriate tool and fill the measured actual size into the tool card.
3. Determine reasonable cutting parameters. It mainly refers to spindle speed, back feed, feed speed, etc.
4. There is enough space for automatic tool change to avoid collision with workpiece or fixture. It is recommended that the tool change position be set at the origin of the machine tool.
5. In order to check and debug the program, the main program mainly completes the tool change and subroutine call. This procedure is simple and clear.
6. Check and test run the compiled program, and pay attention to whether there is interference between tools, fixtures or workpieces.
The above six problems should be considered when programming machining, so that the workpiece can be machined more efficiently when machining.
(Editor: we are Shenzhen perfect precision products Co., Ltd., specializing in providing laser cutting, bending, stamping, spinning, welding and other high-quality sheet metal processing services. With 15 years of experience and a 3000 square meter factory, we are proud to work closely with our customers to achieve good products. We have an experienced engineering team, iso9001:2015 quality system, and 100% inspection before delivery to ensure quality Quantity. In order to ensure critical dimensions and smooth surface finish, we import our machines from the United States and Japan. Welcome to contact us and we look forward to establishing a good partnership with you. You can send us an inquiry below)