1) The precision CNC machining manufacturer stated that the card material should be loaded first and then the tool should be loaded to prevent the hand from touching the tool when loading the card material. If the tool has been installed, when loading the material, the worktable should be moved to the outside first to ensure that when loading the material, it will not interfere with the tool, so as to avoid injury or break the tool.
2) When disassembling the tool, be sure to first observe whether the spindle stops rotating.
3) According to the precision CNC processing manufacturer, when unloading the tool, do not hold or pinch the blade of the tool to avoid scratching the blade.
4) After the wrench is used, it should be placed in the tool storage area, and it is not allowed to be placed on the Y-axis shield or beam.
5) During the machining process, the operator is not allowed to observe the cutting position at close range to prevent chips from falling into the eyes.
6) Before starting the processing, check the position of the oil nozzle before turning on the oil pump switch, so as to avoid spraying the oil to other positions when flushing.
7) According to the analysis of the precision CNC machining manufacturer, when the observation is suspended during the machining gap, the worktable must be moved away from the cutting position.