In the machinery parts processing industry, the safety problem is undoubtedly the most important. So do you know what precautions should be taken during (before and after) the machining of mechanical parts in addition to safety problems? Let's share with you today!
matters needing attention:
1. Strictly abide by the operating procedures and wear the specified labor protection appliances.
2. Be familiar with the drawings and relevant process requirements, and fully understand the geometric shape and size requirements of the processed parts.
3. Collect materials according to the material specifications required by the drawing process, and check whether the materials meet the process requirements.
4. Select the appropriate machining tool.
5. Prepare the required measuring tools for processing parts.
6. Check whether the equipment is normal and the safety protection is complete, add lubricating oil to each lubricating oil hole, and check whether the equipment is idling.
7. The workpiece shall be clamped and corrected reliably.
8. Conduct normal processing according to process requirements.
9. Do a good job of process self inspection.
10. After processing, call the inspector for special inspection after mutual inspection.
11. After the operation is completed, immediately clean the oil dirt and chips on the equipment and the work site, and place the parts in order.
12. Turn off the power and maintain the equipment.
The above content is the sharing of Xiaobian. I hope you must pay attention to the above items during the processing of mechanical parts!