Reasonably select machining process of mechanical die
In order to control the processing accuracy of the mold, first of all, according to the real needs of the mold, select the appropriate processing technology, select the appropriate technology from a variety of types, and compare the
Advantages and disadvantages, similarities and differences, and finally get the appropriate scheme. Now the widely used processing technologies include turning process, bench work process, stamping process and other technical means. But every
Each process has its own process characteristics, so it has different effects on mold shaping and accuracy. Therefore, it is necessary to optimize the process flow and improve the mold
Precision machining degree.
Selected mechanical mold processing equipment
During mold processing, there are many types and quantities of processing instruments used, and the processing instruments used for each processing stage will also be different. For example, die application forger
In the process of processing, in order to improve the accuracy of the die, the furnace clamp is required to be selected in the process of controlling the forging temperature. As the clamp head will fail under the influence of alternating cold and hot
The selection of the appropriate clamp will directly affect the precision of the die. In the use of bench work technology, the file will be used. How to select the correct file type according to the characteristics of the mold to market the mold
Forming effect. Therefore, in order to ensure the improvement of precision of precision machining dies, it is necessary to properly handle the processing instruments and select the appropriate processing tools.
Optimization of control means
In the process of mold processing, the types of mechanical molds processed are more diversified, including cylindrical molds, conical molds, and some irregular shaped molds. therefore
In the overall processing process, there are large differences in the processing materials used for mold processing. In order to meet the diversification of tool types, it is necessary to fully consider the actual demand in production, so as to
Achieve high efficiency of work.
