When the machine tool is placed on the foundation, it should be leveled in a free state, and then the anchor bolts should be locked evenly. For ordinary machine tools, the reading of the level gauge shall not exceed 0.04/1000mm, and for high-precision machine tools, the reading of the level gauge shall not exceed 0.02/1000mm. When measuring the installation accuracy, it should be carried out at a constant temperature, and the measuring tool should be used after a period of constant temperature. When installing the machine tool, try to avoid the installation method that causes forced deformation of the machine tool. When installing the machine tool, some parts of the machine tool should not be removed casually. The removal of parts may lead to the redistribution of internal stress in the machine tool, thus affecting the accuracy of the machine tool.
Preparation before commissioning：
After the geometric accuracy of the machine tool passes the inspection, the whole machine needs to be cleaned. Cotton cloth or silk cloth soaked with detergent shall be used, and cotton yarn or gauze shall not be used. Clean the antirust oil or antirust paint applied to protect the guide rail surface and machining surface when the machine tool leaves the factory. Clean the dust on the outer surface of the machine tool. Apply the specified lubricating oil of machine tool on each sliding surface and working surface.
Carefully check whether all parts of the machine tool are filled with oil as required, and whether there is enough coolant in the cooling box. Whether the oil of the hydraulic station and automatic room lubrication device of the machine tool reaches the specified position of the oil level indicator.
Check whether the switches and components in the electrical control box are normal and whether the plug-in integrated circuit boards are in place.
Power on and start the centralized lubrication device to fill all lubricating parts and lubricating oil circuits with lubricating oil. Make all preparations before the action of all parts of the machine tool.
(Editor: we are Shenzhen perfect precision products Co., Ltd., specializing in providing laser cutting, bending, stamping, spinning, welding and other high-quality sheet metal processing services. With 15 years of experience and a 3000 square meter factory, we are proud to work closely with our customers to achieve good products. We have an experienced engineering team, iso9001:2015 quality system, and 100% inspection before delivery to ensure quality Quantity. In order to ensure critical dimensions and smooth surface finish, we import our machines from the United States and Japan. Welcome to contact us and we look forward to establishing a good partnership with you. You can send us an inquiry below)