The development of molds in the future mainly has the following development directions:
1： High accuracy.
Whether the dimensional accuracy can be achieved is the most important factor for manufacturing high-precision, high-quality and high-tech products. Japan and Germany did the best in the past. With decades of continuous learning and innovation, a large number of companies specializing in high-precision mold manufacturing have emerged in China's mold industry.
To make high-precision molds, there are two main factors, one is equipment and the other is talent. With the sharp increase in the number of high-end equipment in China, this is no problem. There are also talents, many of whom come from foreign capital or joint ventures, or bosses or supervisors, who compete with their old employers with the technology they have learned. At present, there is still a certain distance between China and foreign countries in the most sophisticated fields. However, it can be imagined that with our pursuit, this distance will be equalled or surpassed in the near future! It's just a matter of time. Mold master wechat: mujuren after all, the manufacturing industry is also the embodiment of a country's comprehensive national strength, especially a large country. A large country with backward manufacturing industry is abnormal and unstable. Especially in a large country with a large population like ours. Moreover, such high-end manufacturing industry can be converted to the production of military supplies at any time in wartime. It is also an important part of a country's war potential, and the country can not ignore it.
2： High efficiency
That is, high automation. With the popularization of various automatic equipment (mainly robots) for mold production, and the improvement of the intelligence of standard parts inside the mold (mainly hot runner), the efficiency of mold production is getting higher and higher, and will develop towards a higher and better realm. In this process, the requirements for mold designers will become higher and higher. At that time, mold designers should not only understand the automation equipment, but also participate in the design.
Not only that, in the process of design, the requirements for cycle will be higher and higher, which also requires that the quality of mold designers also needs to be constantly improved.
At the same time, in this process, it is a great blow to the general workers' Union of the injection molding factory. Because they are all mechanized, there is no need for so many workers, and the number of employees in injection molding factories will be less and less, and even develop into a factory with only a few people, and then all machines and computers, like enterprises in developed countries. That is to say, in the future when the degree of mechanization is highly developed, the term "general labor" may also disappear. In the future, there were only three kinds of people in the factory: managers, technicians and robots.
3： New mould
With the continuous progress of technological innovation, many molds that used to be very complicated and tortuous can become very simple. Many structures that were previously considered impossible have become possible. These are new opportunities and challenges for the mold industry. Specifically, they are opportunities and challenges for mold designers. Mold factories that master these new mold design and manufacturing technologies will have more initiative. Mastering the high-tech mold requires profound design and manufacturing background. The rich profits of these new molds will be a good return to the companies that have invested a lot in this, and these high-tech technologies will also become a good resource for the company to gain fame and win more high-quality customers!
Let me briefly cite a few types of molds that have emerged in recent years: four sided rotary ejection molds, molds that slide with the products after the secondary injection of plastic products, injection and stamping integrated molds, high-speed continuous stamping molds (I came from a plastic mold background and don't know much about stamping molds, so I hope that friends with this knowledge can give me some advice), and so on. Any mold factory that can make breakthroughs and innovations in these fields will get more returns!
Price war is always a low-level behavior, which compresses everyone's living space, and the final result is nothing more than death. The price war of shopping is not as good as the technology war and the quality war of shopping. As long as you are superior in technology and quality, even if your price is high, there will be a large number of customers flocking to you, which is called brand! Moreover, if enterprises are all on the path of giving priority to technology and quality, the salary of high-tech talents can be expected to increase!
Mold is always an industry that depends on technology and quality!
4： Product R & D and mold integration
This trend is also inevitable. This change is a change that can affect the manufacturing mode more than replacing the all-round mold master with an assembly line. In short, it is a new post that integrates mold design and product R & D, a brand-new post that can be responsible for a series of work of the whole product from appearance to mechanism, to mold, to mold processing, mold production and product assembly. Become the absolute core of the manufacturing industry.