Clamping mechanism of workpiece
The wedge clamping mechanism uses the pressure generated when the wedge moves to clamp the tool A mechanism of components.
Wedge clamping mechanism The wedge clamping mechanism uses the pressure generated when the wedge moves
A mechanism for tightening workpieces. Under the action of the force, the wedge block wedges the workpiece and clamps
It has the function of wedging, and the original force can be manually, pneumatically or hydraulically driven The unit is driven.

Screw clamping mechanism The screw clamping mechanism uses the pressure generated by the rotation of the screw or nut to clamp A mechanism for tightening workpieces, which is widely used in machine tools and fixtures, mainly including single screw Clamping and spiral pressing plate combined clamping.

1. Single screw clamping
Single screw clamp
Single screw clamping mechanism is shown. For simple screw clamping, it is necessary to use
Wrenches and screws may drive the workpiece to damage the positioning when rotating, and
The contact area of the workpiece is small, and the workpiece surface is easy to be damaged. The lower end is equipped with a floating pressure block
There is a gap between the block and the screw, which can swing to ensure a good
Contact. Shown is the mechanism for clamping with nut, and the increase between nut and workpiece surface
With spherical washer, the clamping force on the workpiece can be evenly distributed and the screw production can be avoided
Produce bending deformation. The helix can be regarded as a wedge around the cylinder, so The calculation of the clamping force of the screw clamping mechanism is similar to that of the wedge.

2. Screw pressing plate clamping mechanism
The screw pressing plate clamping mechanism is a clamping device composed of screw and lever (i.e. pressing plate)
The screw can be used as the element generating the original force, and then the clamp can be changed by using the pressing plate
The size, direction and clamping stroke of the tightening force are used to clamp the workpiece. The structure is Movable screw clamping mechanism for pressing plate. There is a k-groove under the pressing plate to make the pressing plate move along the groove .Move to for easy workpiece loading and unloading. The spring plays the role of supporting the pressing plate, making it
The workpiece will not fall after being unloaded. A spherical washer is installed under the nut, so that when the workpiece is high
When the change of dimension makes the pressing plate inclined, the screw will not be forced to bend when clamping the workpiece
Qu. The structure is a clamping mechanism with a hinged pressing plate, which can be generated in two directions
The clamping force points to the bearing surfaces of the two positioning elements respectively. Hook shaped guanidine plate
The prominent feature of the clamping mechanism is its compact structure, and the screw is not subject to bending moment
Wide application. To facilitate the loading and unloading of the workpiece, the hook shaped pressing plate can rotate around its axis.
