Imported CNC lathe machining parts operation
Before mechanical work, check whether the moving parts are filled with lubricating oil, then start and check whether the clutch and brake are normal, and run the machine tool for 1-3 minutes.
It is necessary to wait for all other personnel to leave the mechanical work area and remove the sundries on the workbench before starting the power supply to start the machine.
Imported CNC lathe processing
Maintain the correct posture at work, and have sufficient energy to cope with the work. If you find that you are not feeling well, you should leave the job immediately and report to the leader. When operating, it is necessary to concentrate on thinking, and it is strictly forbidden to chat and cooperate with each other. The operator should not operate in a state of irritability and fatigue, so as to avoid accidents and ensure safe operation. Before entering the workplace, all employees check whether their clothing conforms to the work requirements. Slippers, high-heeled shoes and clothing that affect safety are not allowed, and those with long hair must wear a helmet.
When the imported CNC lathe processing machinery is working, it is forbidden to put your hand into the working area of the slider, and it is strictly forbidden to take and place the workpiece by hand. Use standard tools when picking and placing workpieces in the die. If you find that the machine has abnormal sound or the machine fails, you should immediately turn off the power switch for inspection. After the machine is started, one person shall transport the materials and operate the machine. Others shall not press the electric building or step on the foot switch board, nor can they put their hands into the working area of the machine or touch the moving parts of the machine with their hands.
When replacing the mold, first turn off the power supply, and then start to install and debug the mold after the movement of the punch press stops. After installation and adjustment, move the flywheel by hand to test punch twice to check whether the upper and lower molds are symmetrical and reasonable, whether the screws are firm, and whether the blank holder is in a reasonable position.