1. According to the nature of the material to be processed, change the angle of the tool or increase the chip breaker, select the appropriate feed rate, and break the band-shaped chips into small coils or block chips and remove them.
2. Install a chip remover on the tool, or install a shield and baffle on the machine tool to control the flow of chips without hurting people.
3. For high-speed cutting of pig iron, copper and aluminum materials, in addition to installing guards and baffles on the machine tool, the operator should be equipped with protective glasses.
4. Use tools to remove iron filings on the machine tool and the workplace in time to prevent injury to hands and feet. Never pick up iron filings with your hands.