1. Parting surface, that is, the contact surface where the die and the punch cooperate with each other when the die is closed. The selection of its position and form is affected by factors such as product shape and appearance, wall thickness, molding method, post-processing technology, mold type and structure, demolding method and molding machine structure.
2. Structural parts, that is, the design of large CNC machining structural parts such as sliders, inclined tops, and straight top blocks of complex molds is very critical, which is related to the life of the mold, processing cycle, cost, product quality, etc. Therefore, the core structure of complex molds is designed. The designer's comprehensive ability is required to be high, and the design scheme that is simpler, more durable and more economical is pursued as much as possible.
3. Mold accuracy, that is, card avoidance, precise positioning, guide posts, positioning pins, etc. The positioning system is related to the appearance quality of the product, the quality and life of the mold. According to the different structure of the mold, different positioning methods are selected. The positioning accuracy control mainly depends on the processing. The internal mold positioning is mainly considered by the designer to design a more reasonable and easy-to-adjust positioning. Way.
Fourth, the pouring system, that is, the feeding channel from the injection molding machine nozzle to the cavity, including the main channel, the mold steel supplier runner, the gate and the cold material cavity. In particular, the selection of the gate position should help the molten plastic to fill the cavity in a good flow state, and the solid runner and gate cold material attached to the product are easy to be ejected from the mold and removed when the mold is opened (heat flow). Except for Dao models).
5. Plastic shrinkage rate and various factors affecting the dimensional accuracy of products, such as mold manufacturing and assembly errors, mold wear, etc. In addition, when designing compression molds and injection molds, the matching of process and structural parameters of the molding machine should also be considered. Computer-aided design technology has been widely used in plastic mold design.
Looking forward to your consultation if there is anything unclear