Ordinary turning tools are basically composed of two parts: the tool head and the tool body. The cutter head is the cutting part, and the cutter body clamps the turning tool on the tool holder, called the clamping part, and carries the cutting load.
The integral internal thread turning tool of the lathe is integrally forged from high-speed steel, and is mostly used for the processing of internal holes with small diameters, such as internal hole rental, fine turning, internal grooves and various internal threads.
Welded turning tools for lathe machining of outer circle or meat iL are welded with high-speed steel or cemented carbide on the tool body, which not only saves tool materials, but also facilitates sharpening. It is the most widely used structural form.
The mechanical clamping structure means that the standard blade with several cutting edges will be mechanically clamped on the standard cutter body. It does not need to be sharpened during use, and can be used only by grinding with a grindstone. After the cutting edge of the lathe is blunt, the clamping mechanism can be released, and the blade can be turned at an angle for a new cutting edge to continue cutting. There are many forms of this structure of lathes, and their main advantages are: saving precious tool materials and sharpening time, reducing the labor intensity of workers, and improving labor productivity.
For the inner hole tool holder, the lathe installs a small tool tip on the tool holder made of carbon steel, and fastens it with a hexagon socket screw at the top or above, which is used for various processing of through holes. The length of the lathe tool holder is fixed; the length of the adjustable inner hole rectangular tool holder can be adapted to the inner hole processing of various hole depths. Therefore, the lathe can be made into several groups according to the size of the hole diameter and the depth of the hole, so as to be used for selection during processing. The common features of lathes are: simple production, convenient loading and unloading, saving tool materials, and wide application.
The elastic trimming turning tool is a high-speed steel blade welded to the elastic tool body for low-speed thread threading or polishing and finishing to prevent the phenomenon of knife sticking. It is mostly used for finishing surfaces that cannot be ground. The trimming tool of the lathe has a straight cutting edge. If the tool is installed accurately, even if a large feed rate is used, a machined surface with a low surface roughness value can be obtained.
A flexible shank that clamps the blade for cutting. The lathe mounts the universal high-speed steel insert on the elastic shank. Its characteristics are that in addition to buffering the cutting force, it also saves tool materials, makes the cutting edge simple and easy to replace, and has great application value in low-speed cutting.
The elastic shank is a general-purpose shank for cutting threads or worms. Its biggest feature is that it can be adjusted according to the helix angle. The installation angle of the rotary cutter head, the lathe has obvious advantages when using the normal turning helix.
The elastic tool bar of the lathe is made of spring steel with good elasticity. Its structural form is as follows: a transverse groove is opened at the front end of the tool bar, and the wide-edged polishing head or curved cutter head is placed horizontally in the transverse groove for clamping. Carry out various forms of cutting such as trimming or shaping.
In order to adjust the elastic force of the elastic turning tool or the elastic tool bar, sometimes a buffer pad such as copper or bamboo is inserted between the elastic gaps, so that the tool bar can not only withstand the normal cutting stress, but also the fork can play the role of the turning tool when it is in an abnormal state. Elasticity advantage to protect the normal operation of turning tools.
