Hardware accessories: Small hardware products are mostly not final consumer goods. Instead, it is used as ancillary products for industrial manufacturing, semi-finished products, and tools used in the production process. Only a small part of daily hardware products are the tool consumer goods that people must live with. Such as: screws, screwdrivers, wrenches, fishing gear, etc. Hardware accessories refer to machine parts or components made of hardware, as well as some small hardware products. It can be used alone or as an aid.
Safety operating procedures for hardware processing: When processing products. The operator must maintain the correct posture and have sufficient energy to cope with the work. If he finds physical discomfort, he must leave the job immediately for personal safety and report to the workshop supervisor or a higher-level leader. When operating, the mind must be concentrated, gossip is strictly prohibited, and mutual cooperation is prohibited. The operator should not operate in a state of irritability and fatigue. For personal safety, avoid accidents and ensure safe operation. Before entering the workplace, all employees check whether their clothing conforms to the work requirements. Slippers, high-heeled shoes and clothing that affect safety are not allowed, and those with long hair must wear a helmet.
Before mechanical work, check whether the moving parts are filled with lubricating oil, then start and check whether the clutch and brake are normal, and run the machine tool for 1-3 minutes.
When replacing the mold, first turn off the power supply, and then start to install and debug the mold after the movement of the punch press stops. After installation and adjustment, move the flywheel by hand to test the punch twice. In order to avoid unnecessary collision between the machine and the product to be processed, the upper and lower molds must be checked for symmetry and reasonableness, whether the screws are firm, and whether the blank holder is reasonable. position.
You must wait for all other personnel to leave the mechanical work area and remove the sundries on the workbench before starting the power supply to start the machine.
When the machine is working, it is forbidden to put your hand into the working area of the slider, and it is strictly forbidden to take and place the workpiece by hand. Standard tools must be used when picking and placing workpieces in the die. If you find that the machine has abnormal sound or the machine fails, you should immediately turn off the power switch for inspection. After the machine is started, one person shall transport the materials and operate the machine. Others shall not press the electric construction or step on the foot switch. For the safety of others, they cannot put their hands into the working area of the machine or touch the moving parts of the machine with their hands.
Looking forward to your consultation if there is anything unclear