How to maintain and maintain the turning and milling compound?
1. Make sure that enough lubricating oil is added before work and the lubricating oil circuit is working normally: abnormal lubrication causes important parts to heat up or even damage;
2. Whether the environment is humid or dusty: the machine has electrical parts, and the environment is too humid or dust will cause short-circuit leakage, etc.;
3. Regularly check whether the screw parts are loose: the long-term use of the machine may lead to the loosening of small parts such as screws and protective covers, please pay attention to checking and deal with them in time;
4. Whether the environment is humid and dusty: the machine has electrical parts, and the environment is too humid or dust will cause short-circuit leakage and so on.
5. Strictly prevent collisions, resulting in damage to the displacement of the ball screw nut returner, which affects the accuracy and produces noise;
6. When the machine tool adopts large flow cooling, pay attention to increase the lubrication frequency and flow of the ball screw to avoid rust on the screw;
7. Pay attention to the ball screw to avoid chips, dust, impurities and other particles from entering the working area of the screw pair, resulting in damage to the screw;
8. Regularly check and replace the hydraulic oil: Regularly check whether the hydraulic oil of the turning-milling compound lathe has a large amount of impurities or whether it is discolored. Generally, the hydraulic oil should be replaced every 10 months.