Suspension accessories: front axle, rear axle, swing arm, ball joint, shock absorber, coil spring, etc.; sensors: water temperature sensor, intake pressure sensor, air temperature sensor, air flow meter, oil pressure sensor, oxygen sensor, knock sensor, etc,
Engine accessories: cylinder head, engine block, oil pan, etc., customized processing of auto parts
Cooling system accessories: water pump, water pipe, radiator (water tank), radiator fan, air conditioner: compressor, condenser, drying bottle, air conditioning (K ò ng) pipe, evaporation tank, drum (G ǔ) Fan, air conditioning fan.
After heat treatment, the hardness can reach 69.5 ~ 70hrc, and the high-temperature hardness at 600 ℃ is 2 ~ 3HRC higher than that of molten steel, especially the high-temperature hardness is increased significantly, due to PMHSS carbide particles (k ē) The particles are uniform, the distributed surface area is large, and it is not easy to peel off from the cutting edge, so the wear resistance of PMHSS tools is also improved by 20% - 30%.
The larger the tool extension length is, the lower the tool strength is, and the more prone it is to deformation and radial runout, resulting in poor workpiece surface processing quality. If the length of the tool can be reduced by 20%, the probability of radial runout can also be reduced by half.
